Warranty

Terms & Conditions:
We thank you for choosing calliber bath for your home/office and wish you a very pleasant experience.
Although our products are made to work for much longer period than the warranty periods, proper installation by
trained technician and maintenance of the products are needed to get optimum performance.
Kindly go through the installation and maintenance guidelines and follow the same.
calliber bath also offers preventive annual maintenance at a nominal cost. Please write to info@calliberbath.com for
further details.
Care and cleaning guidelines for Sanitaryware products:

• Kindly inspect the products at the time of taking delivery.
• calliber bath is not responsible for any damage occurred in transit.
• The installation should be done by trained technician.
• calliber bath is not responsible for damage/malfunctioning due to improper installation.
• While cleaning the ceramic products after installation, please do not use any abrasive cleansers, as
  they may damage the ceramic surface. Use warm water and liquid detergent to clean the ceramic surface.
  Always test product cleaning solution on an inconspicuous area of the product before applying it to the entire
  surface.
• Over tightening may cause breakage or chipping of vitreous china.
• The wash basin and water closet are heavy and it is recommended that two persons hold it while being fixed.
• Do not use metal tools or wire brushers to remove any plaster. Use powder type detergent on a damp cloth to
  provide mild abrasive action to remove any residual plaster or white cement/putty. Clean the outside surface
  of the vitreous china product with mild soap and warm water. Wipe the entire surface completely dry with a
  clean, soft cloth.
• Please do not use cement at any hollow portion of the vitreous China product.
• Improper/wrong installation of the products automatically terminates and nullifies this warranty. Also it does
  not cover normal wear and tear.
• Do not allow cleansers containing petroleum distillates to remain in contact with ceramic surface for long
  periods of time.
• Carefully inspect the new product for damage before installation.
• calliber bath is not liable or shall not be responsible for any such damage/scratch or for improper installation.
  Care and cleaning guidelines for Faucetware products:
• Carefully inspect the new product for damage before installation.
• calliber bath is not liable or shall not be responsible for any such damage/scratch or for improper installation.
• The installation should be done by trained technician.
• Due to presence of minerals and salt in water, scaling is formed on the product if it is not cleaned regularly. The
  products should be cleaned gently at regular intervals. Also, take extra care to clean the edges and corners of
  the products because these areas are more vulnerable for scale settling.
• Clean the aerators from time to time for a perfect foam flow of water from the faucet. The property of water
  being used is very important for your plumbing installations (Pipes etc.), as well as for your own hygiene. The
  hardness of water should not exceed 300-400ppm.
• During cleaning of the tiles or floors in the bathroom with cleaning agents which contain acids or chemicals,
  acid fumes are formed. Because the basic material used in the Faucet is brass and brass being an alloy of
  3
  Care and cleaning guidelines for Faucetware products:
  copper, reacts with these acid fumes. With this reaction, a green color layer / Black Spots are formed on the
  products resulting in damage to the outer finish or coating. It is recommended the faucets be covered with
  cloth before doing such floor cleaning, to protect them from acidic fumes.
• Scratching or scrubbing occurs due to hard nature of cloth or coarse cleaning powder being used for
  cleaning. Use a gentle fluffy soft cloth for cleaning the surface.
• Always test your cleaning solution on an inconspicuous area of the product before applying to entire surface
  of the product or calliber bath recommends the use of Cerena Cleaning Solution.
• Atmospheric condition applies mostly to salt content in the air in coastal areas, sometime the air reacts with
  brass and black spots emerge on the surface of product. Therefore, the product is required to be cleaned
  regularly. At the time of installation of these products, cover the products with the cloth covers provided in
  packaging or with polythene till the time you actually start using them.
• Improper/wrong installation of the products automatically terminates and nullifies this warranty and this
  warranty does not cover problems arising from low water pressure, more than recommended water pressure,
  and wear and tear, impurities/hardness beyond the norms of drinking water or improper care and cleaning.
• The warranty shall not be applicable, in case, if the defect is caused due to improper installation, undesirable
  working environments such as contaminated water, hardness of water beyond the acceptable limits of
  drinking water or even by improper handling. calliber bath shall repair/replace defective components (after
  examination by authorized technician) on either chargeable basis or free of charge, as is decided by calliber bath
  CARE. For better performance of the product, we recommended water pressure should be between 2.5 bar to
  3 bar.
• Carefully inspect the new product for damage before installation.
• calliber bath is not liable or shall not be responsible for any such damage/scratch or for improper installation.
  Care and cleaning guidelines for Plastic products:
• While cleaning the cistern/Seat cover after installation, do not use abrasive cleansers, as they may damage the
  Plastic Products.
• Do not allow cleansers containing petroleum distillates, abrasive cleaners or solvents and Product containing
  chlorine to remain in contact with ceramic surface and damage fittings for long periods of time which may
  lead to leakage and property damage.
• Clean the outside surface of the polypropylene product with mild soap and warm water. Wipe the entire
  surface completely dry with a clean, soft cloth.
• Carefully inspect the new product for damage before installation.
• calliber bath is not liable or shall not be responsible for any such damage/scratch or for improper installation.
  Care and cleaning guidelines for Stainless Steel Kitchen Sinks:
• Carefully inspect the new product for any damage before installation.
• calliber bath is not liable or shall not be responsible for any such damage or for improper installation.
• The installation should be done by trained technician.
• Every product has limitations and in time may deteriorate from handling, cleaning or exposure to
  atmospheric conditions such as extreme climate, pollution and proximity to salt water, humidity and
  ultraviolet rays. Eventual tarnishing is therefore, not a defect, but a normal process, which is unavoidable.
  Proper care would ensure that these products last a longer period.
• Clean the sink at least once a week. When cleaning use mild soapy water and rub in the direction of the grain
  lines, rinse and towel dry.
• Drying is important to eliminate collection of lime scale, mineral deposits and calcium stack.
  4
  Care and cleaning guidelines for Stainless Steel Kitchen Sinks:
• Always rinse the sink after every use and wipe dry.
• Avoid use of cleaners & bleachers containing harmful chemicals and acid.
• Avoid prolonged contact with citric or high salt concentration food as it can lead to staining, pitting and
  corrosion of the sink.
• Steel wool / wired brushes / abrasive sponge pads are not recommended for cleaning as it leads to scratches
  and rusting on the sink.
• Do not use the sink drain board as a cutting or chopping board as it will leave scratches on the sink.
• Prolonged exposure to sunlight will lead the film coating to stick to the sink and may be difficult to remove
  later.
• Do not remove the film coating on the sink before installation to avoid scratches and damage during
  installation. Remove the film only after installation.
• Remove all traces of cement, mortar, lime, POP etc. used during installation as it can lead to surface rusting or
  pitting.
• Carefully inspect the new product for damage before installation.
• calliber bath is not liable or shall not be responsible for any such damage/scratch or for improper installation.
  Care and cleaning guidelines for Wellness products:
• Carefully inspect the new product for any damage before installation.
• calliber bath is not liable or shall not be responsible for any such damage or for improper installation.
• The installation should be done by trained technician.
• Cleaning is an important maintenance procedure because it keeps the unit stain free. Since steam showers
  produce moisture, they need to be cleaned and dried regularly. Stains growth can be cleaned using allpurpose cleaners or simple home remedies, such as vinegar cleaning solutions.
• Provide ventilation in the room where the unit is installed. Install an exhaust fan or open the windows every
  once in a while to provide air circulation. Allow the unit to be opened to make sure that the moisture escapes.
• If the silicone seals are loose, replace them. Sealing the doors and walls is quite easy. Nozzles, joints, and
  drainage systems can be tightened or repaired using the most basic plumbing skills.
• Clean the outside surface of the acrylic product with mild soap and warm water. Wipe the entire surface
  completely dry with a clean, soft cloth.
• Do not use electrical appliances such as heater or fanner thus preventing any kind of electrical shocks.
• Carefully inspect the new product for damage before installation.
• calliber bath is not liable or shall not be responsible for any such damage/scratch or for improper installation.
• Since regular maintenance is required for whirlpools, steam cubicles, etc. it is recommended that you enter
  into a preventive maintenance contract with calliber bath.
  Care and cleaning guidelines for Sensor products:
• While cleaning the sensor after installation, do not use abrasive cleansers, as they may damage the sensor’s
  surface. Do not use water to clean the sensor.
• Do not use caustic detergent. Do not ever strike at the machine directly.
• Check the battery and power regularly. When the indicator flashes every four seconds, it is out of power. Please
  change the batteries.
• Clean the filter net from time to time (every six or twelve months or whenever the water flow becomes less).
• calliber bath is not liable or shall not be responsible for any such damage or for improper installation. The installation
  manual is enclosed along with the product which can be referred during the same.
  5
  Care and cleaning guidelines for Sensor products:
• Carefully inspect the new product for damage before installation.
• calliber bath is not liable or shall not be responsible for any such damage/scratch or for improper installation.
  Value Added Services:
• In case of any after sales query customer can contact calliber bath Care by email info@calliberbath.com
• Again if you or your technician is facing difficulty during installation of any of our products, please contact the
  calliber bath Care number mentioned above for guidance.
• As proactive service we offer Preventive Maintenance Contract (PMC). PMC is peace of mind for regular checkup and maintenance of Company products at a nominal price.
• To maintain sheen and shine of Nickel/Chrome surface of the product we offer Cerena, a cleaning agent for
  the purpose.
  Warranty:
• calliber bath plumbing fixtures are warranted free of any manufacturing defects.
• calliber bath will at its choice, repair, replace, or make appropriate adjustment where its inspection discloses any such
  defects occurring in normal usage as per terms mentioned below. calliber bath is not responsible for installation
  costs.
• calliber bath reserves the right to examine product in question, and its installation, prior to replacement and will
  replace free of charge any part that proves defective in material and manufacturing workmanship under
  normal installation, use and service.
• To obtain warranty service, contact calliber bath either through your dealer or plumbing contractor or writing to
  calliber bath.
  Warranty Terms:
• The warranty is applicable from the date of purchase.
• The customer must produce the VAT/GST paid invoice/warranty card in original to avail warranty service. In
  case the purchase has been done by the developer of the apartment, the possession letter from the developer
  will be treated as equivalent to bill.
• The company is not liable for any damage out of faulty installation.
• The warranty becomes null and void if installation is not done by qualified and experienced technician and/or
  as per the installation procedure laid down by the company.
• The company is also not liable to pay for any civil or construction work required during installation of new
  products or replacement/repair of old products.
• The company is not liable for any consequential expenses or damages.
• An equivalent replacement at pro-rata basis shall be provided in case the product has been discontinued,
  where in the customer has to pay proportionate amount on the current MRP, given the product is within the
  aforementioned warranty terms.
• If the manufacturing defect is seen within the first year of purchase on the ceramic product, the customer is
  entitled for free replacement. In case the manufacturing defect is seen after the first year of purchase & before
  the warranty period expires, the customer has to pay the company on proportionate basis on current MRP for
  new replacement.
• During the warranty period and under normal use, if the product / component / part is found to be of
  faulty due to manufacturing defect, the same will be repaired or replaced upon production of this warranty
  5
  Warranty Terms:
  certificate, without charges either for part or labour or both, the decision of company official will be final for
  fault qualifies for warranty.
• Warranty remains applicable only if the products have at all times been used strictly in accordance with the
  terms of this warranty and has not been improperly or negligently handled and is not maintained in
  accordance to maintenance guidelines given.
• In the event of non-availability of components or parts due to any reason whatsoever Company or its
  Authorized Service provider or the Dealer will not be responsible or liable for any delay that may be caused to
  service/repair of the Products; no claims financial or otherwise will be entertained.
• Company and customer agree that company will not be liable for any damages whatsoever arising out of use
  or inability to use its Company’s Products. calliber bath bears no responsibility for incidental or consequential
  damages arising out of use or inability to use Company Product.
• By purchasing this product, customer agrees to Company’s aforesaid warranty on the product.
• Company neither assumes nor authorizes any person to assume for us any other obligation or liability in
  connection with sale of this product.
• Customer and Company agree that customer’s sole remedy for any defects in goods hereunder shall be
  limited to the repair or replacement at the Company’s option within warranty period after delivery of such
  goods to the first purchaser, of any defective goods, of which notice of defects is given by the Customer to the
  Company in accordance with terms of this warranty certificate. The part/product against replaced
  part/product will be property of Company.
• Company shall not be liable to Customer claiming the warranty under the terms of condition of this Limited
  Warranty Certificate, due to defects caused by rodents/pets or in the events of force majeure. The Force
  Majeure means any disaster, act of God or the public enemy, any accident, explosion, fire, storm, earthquake,
  electric storms, tornado, flood, casualty, lockout, strike, labor conditions, unavoidable accident, nuclear
  explosion, national calamity, or any other circumstance or event or by any enactment of law, or by order of any
  legally constituted authority, or by any other similar cause of the Company or beyond the reasonable control
  of the party relying upon such circumstance or event.
• Company and customer agree that calliber bath bears no responsibility for incidental and / or consequential damage
  arising out of use and for inability to use a product. Company liability will be limited and restricted to the
  product replacement/value of the product sold. Company under all circumstances shall not be liable to
  uninstall the defective product or installed replacement product. In case replacement is the only option then
  the customer has to hand over the defective product to the seller from whom it was purchased and take the
  replacement product from there.